Windows 2000 TCP/IP protocol

As part of your network check, you need to verify your TCP/IP-configuration ( if you intend
to use TCP/IP-protocol):
- Properties of "My Network Places" on your Desktop, then
- Properties of "Local Area Connection":

then click on "Internet Protocol (TCP/IP)" and select the button "Properties":

Windows 2000 has configured TCP/IP "to Obtain an IP address automatically" , i.e. via DHCP.

Lets verify the current TCP/IP configuration:
Unluckily, I could not find the equivalent of the Win95/98 utility "winipcfg", so I use the same
utility as under NT4: "IPCONFIG"
- select from your Start-Menu: "Programs" / "Accessories" / "Command Prompt",
- enter: IPCONFIG

As Windows98, Windows2000 tries first to find a DHCP-server on thge network.
If this fails, it then uses its own "AutoConfiguration" method to generate an IP-address.
(I still have to find out more details on how to control / switch on/off this feature)

But a lot of networks work with a predefined range of IP-addresses (which also shortens the Boot-up time of Win98 and Windows2000, since they do not have to wait anymore for the request to a DHCP-server to time-out):

Even though the statement above is true, we do not Specify IP Addresses.

Obtain an IP Address Automatically must be checked

Nice new feature on Windows 2000: after changing the IP-address, it is NOT anymore
required to restart the system (like on Win95/98/Nt4), so I can run again "IPCONFIG"
to check the change:

A last low-level check to verify, that the network is working, using the
TCP/IP diagnostic tool "PING" to test the connection to another system on the network:

If PING does not get a reply, verify your TCP/IP settings and trouble-shoot your
network card and cables.

Home

Microsoft logo's are trademarks of Microsoft Corporation and All trademarks mentioned on this page are the property of their respective owners.y